Reviewed by The Roofing Brief Team. Last reviewed: November 2026.
Hail damage on a roof looks like scattered, random dents and dark bruises where the surface has been struck: on asphalt shingles it appears as round black divots with the granules knocked off, exposing a soft, shiny mat underneath. The pattern is the giveaway. Hail hits land in a random spray across a slope, unlike the directional streaks of wind damage or the straight lines of foot traffic. The look changes by material: dents on metal, splits on wood, chips on tile, and the soft metals (gutters, vents) show it first. The lookalikes that get claims denied are blistering, age wear, foot traffic and wind.
What does hail damage look like on an asphalt shingle roof?
On an asphalt shingle roof, hail damage looks like round dark spots roughly the diameter of the hailstone, where the impact has knocked the protective granules loose and exposed the black or shiny asphalt mat beneath. A fresh hit feels soft when you press it, like the bruise on a ripe apple, because the fiberglass mat has been fractured under the surface.
The specific signs to look for on asphalt and fiberglass shingles:
- Granule loss: dark, round spots where the coarse mineral granules are gone and the smooth mat shows through.
- Bruising: a soft, springy spot with no crack visible yet, which is the mat fractured underneath.
- Shiny asphalt: a fresh exposed spot looks shiny and black because the asphalt has not yet weathered or collected dirt.
- Random pattern: hits scattered with no direction, often heavier on the slopes facing the storm.
- Granules in the gutters: a pile of sand-like granules at the downspout exits after a storm.
What does hail damage look like on metal, wood, and tile roofs?
Off asphalt, hail shows as metal dents, wood splits, and tile or slate cracks and chips. The table gives the sign and the concern for each surface: cosmetic, or a real leak risk.
| Roof material | What hail damage looks like | Typical concern |
|---|---|---|
| Asphalt / fiberglass shingle | Round dark divots, granule loss, soft bruises, exposed shiny mat | Functional: mat fracture shortens life and invites leaks |
| Metal (standing seam, corrugated) | Dents and dimples, chipped paint or coating that can rust, loosened seams and fasteners | Often cosmetic, but coating damage and loose seams can leak |
| Wood shake / shingle | Splits and cracks with fresh orange edges, usually near the thin edges, dents or scars | Functional: splits open a direct water path |
| Clay or concrete tile | Chips, cracked corners, hairline cracks, broken pieces on the ground | Functional: cracked tiles let water reach the underlayment |
| Slate | Punctures, chips, and clean cracks, with fragments near the foundation | Functional: broken slate exposes the deck |
Metal is the outlier. A dented standing seam or corrugated panel with an intact coating often still sheds water, which is why hail dents on a metal roof are frequently a cosmetic dispute. On asphalt, wood, tile and slate, a visible hit usually means the water barrier is compromised.
Where does hail damage show up first? The soft metals
Soft metals show hail first. Gutters, downspouts, metal vent hoods, valley flashing and air conditioner condenser fins dent at smaller stones than shingles do, and the National Weather Service counts hail of 1 inch or larger as severe, so a dented gutter confirms a storm worth checking the shingles for.
Random round dings along a gutter run or on a vent cap are the best ground-level sign of real hail. Adjusters call them collateral or soft-metal hits and use them as proof of a hail event before climbing up. Check these spots:
- Gutters and downspouts: round dents on the front face and dings on the downspout elbows.
- Metal vent hoods and pipe caps: dimples on the flat metal tops.
- Flashing: dents in valley metal, drip edge, and chimney flashing.
- The AC condenser: bent or flattened fins on the side facing the storm.
- Window screens, mailboxes, and grills: dents that date and size the storm.
For the siding, window and AC checks after the same storm, see our guide to hail damage to a house beyond the roof.
Cosmetic vs functional hail damage: the distinction that decides claims
Cosmetic hail damage changes how a roof looks without shortening its life; functional damage breaks the water barrier and shortens service life. Insurers pay for functional damage and many policies exclude cosmetic damage, so check whether yours carries a cosmetic damage clause before filing.
| Sign | Cosmetic | Functional |
|---|---|---|
| Asphalt shingle | Minor scuffs, few isolated granules gone | Soft bruises, mat exposed, granule loss in clusters |
| Metal panel | Dents with intact coating | Chipped coating, split seams, loosened fasteners |
| Coverage | Often excluded by a cosmetic damage clause | Usually covered as a covered peril |
When an adjuster inspects, they typically chalk a 10 foot by 10 foot test square on each slope and count the hits inside it. The hit count that marks a slope as functionally damaged is set by each carrier’s internal guidelines, which carriers generally do not publish, and the outcome can also depend on the policy and state rules. Ask the adjuster which threshold was applied and get the estimate and photos in writing. A single dent rarely totals a roof; a slope full of soft bruises often does.
How to tell hail damage from lookalikes
| If you see | Then |
|---|---|
| Round soft-metal dents plus random black divots with exposed mat | Treat as hail: photograph with dates and get a written inspection with test-square counts |
| Clean gutters, vents and AC fins, with uniform granule thinning | Treat as age wear; a hail claim will likely be denied |
| Dents on a metal panel with the coating intact | Likely cosmetic; check the policy for a cosmetic damage clause before filing |
| Creased or missing shingles at rakes and ridge, directional | Wind damage, a separate peril; document it separately |
| Scuffs along a walking line to a vent or valley | Foot traffic; not a covered hail loss |
A hail claim is denied most often when the damage is not from hail. Blistering, age-related granule loss, foot traffic and manufacturing defects all mimic hail, and an adjuster who spots a lookalike can deny the claim. Check these tells before filing.
| Looks like hail but is not | How to tell it apart |
|---|---|
| Blistering | Blisters are raised pops in the asphalt with a crater, spread evenly, not random. No soft mat fracture underneath. |
| Age-related granule loss | Uniform thinning across the whole slope, heaviest in water-flow paths, not scattered round spots. |
| Foot traffic | Scuffs in walking lines to vents and valleys, directional, following a path rather than random. |
| Manufacturing defect | Repeating pattern or a straight line matching the shingle layout, identical on every course. |
| Wind damage | Creased, lifted, or missing shingles, concentrated on rake and ridge edges, directional not scattered. |
Blistering is the lookalike most often confused with hail on asphalt shingles; for a side-by-side guide, see how to tell hail damage from blistering.
True hail damage is random, round, and paired with matching soft-metal dents from the same storm; clean gutters and vents above worn shingles mean the roof is aging, not hailed. For the shingle-only view of this, see how to identify hail damage to asphalt shingles up close.
What size hail does it take, and how fresh damage looks
Asphalt shingles generally start taking functional hail damage at around 1 inch, the hail size at which the National Weather Service classifies a thunderstorm as severe (the other trigger is wind gusts over 58 mph). Soft metals dent at smaller sizes, while thick tile and slate usually need larger stones to crack. The Insurance Institute for Business and Home Safety tests impact-resistant shingles by firing lab-made hailstones from a cannon, which is why impact-rated shingles carry their own ratings.
Fresh hail damage looks shiny and clean because the exposed asphalt or wood has not weathered yet. For how long those signs stay readable and how to date a hit to a storm, see our guide to old hail damage on a roof. Old damage dulls and collects dirt as it weathers, and the spatter marks hail leaves on oxidized metal typically linger for about a year, per Haag Engineering’s Scott J. Morrison in Professional Roofing (May 2009), which is how adjusters date a hit. This matters for claims: filing quickly keeps the damage looking recent and ties it to a dated storm. For the full breakdown of impact thresholds, see what size hail can damage a roof.
How to check your roof for hail damage safely
Most hail damage can be confirmed from the ground and a ladder without walking the roof, which is safer and enough to decide whether to call a professional. Follow these six steps in order:
- Confirm a storm hit. Search the NOAA NCEI Storm Events Database for a hail report near your address, and record the date and reported size.
- Inspect the soft metals from the ground. Look for round dents on gutters, downspouts, vent hoods, and the AC unit. No soft-metal dents usually means no roof-damaging hail.
- Check ground clues. Look for granule piles at downspout exits and any shingle or tile fragments around the foundation.
- Look at accessible edges from a ladder. Scan the lowest courses and valley metal from a ladder footed on level ground, without stepping onto the roof.
- Photograph everything. Date-stamp wide shots and close-ups of each dent and bruise.
- Call a professional for the roof surface. Leave walking the slopes to a roofer or adjuster, especially on steep or wet roofs.
A professional hail damage roof inspection uses the chalk test square and soft-metal collateral method to document damage the way an insurer expects to see it.
What to do if you find hail damage
If you find functional hail damage, document it, get a professional inspection, and file promptly, because most policies set a reporting deadline. It commonly runs about one year from the storm date, though some states and policies allow two, so read your policy. Our guide to the hail damage threshold for roof replacement explains what adjusters count.
- Photograph the soft-metal dents and roof bruises with dates.
- Get a written inspection from a licensed roofer noting the storm date and test-square counts.
- File the claim before your policy’s reporting deadline.
- Keep the cosmetic versus functional distinction in mind: cosmetic-only damage may be excluded.
The Roofing Brief’s 2026 Severe Weather Roof Damage Report compiles state-by-state hail and wind claim data. For related damage and inspection guides, see the roofing learning hub.
Frequently asked questions
What does hail damage look like on an asphalt shingle roof?
It looks like round dark spots the size of the hailstone where granules have been knocked off, exposing a soft, shiny black mat. Press one and it feels springy, like a bruise on an apple, because the fiberglass mat is fractured underneath. The spots are scattered at random, not in lines.
Can you see hail damage on a roof from the ground?
You can often confirm hail from the ground by checking the soft metals. Round dents on gutters, downspout elbows, metal vent hoods and air conditioner fins are the clearest ground-level proof of damaging hail, and granule piles at downspout exits are a second clue. The shingle surface itself usually needs a closer look from a ladder.
What size hail causes roof damage?
Asphalt shingles generally start taking functional damage around 1 inch hail, the size at which the National Weather Service calls a thunderstorm severe. Soft metals like gutters and vents dent at smaller sizes, while tile and slate usually need larger stones to crack. Wind speed and shingle age lower the threshold.
How do I tell hail damage from normal wear?
Hail damage is random and round, with soft bruises and fresh shiny spots, and it comes with matching dents on nearby soft metals. Normal wear is uniform granule thinning across the slope, heaviest in water-flow paths, with no soft-metal dents. If the gutters and vents are clean, worn shingles point to age, not hail.
Does hail damage always cause a roof to leak right away?
No. Hail often fractures the shingle mat or knocks off granules without an immediate leak, but the damage shortens the roof’s life and can leak later as the exposed mat weathers. Metal dents may never leak at all. This is why insurers separate cosmetic damage from functional damage that breaks the water barrier.
How long do I have to file a hail damage claim?
Most homeowner policies require reporting a hail loss within a set window, commonly about one year from the date of the storm, though some states and policies allow two years. Filing promptly also keeps the damage looking fresh and easier to tie to a dated storm. Check your specific policy language, since deadlines vary by state and carrier.